recordData_Basic

Extends from BaseClasses.Record_Data.

Information

Parameters

TypeNameDefaultDescription
SI.Lengthdimension_hotlegfrom_inch(29)Hot leg inner diameter (d1s1)
SI.Lengthdimension_coldlegfrom_inch(27.5)Hot leg inner diameter (d1s1)
SI.Lengthlength_hotlegfrom_feet(50)Hot leg length
SI.Lengthlength_coldlegfrom_feet(50)Cold leg length
SI.PowerQ_total_th3411e6Total thermal output (d2s1)
SIadd.NonDimQ_frac0.974Fraction of heat generatated in fuel (d2s1)
SI.Pressurep_nominalfrom_psi(2250)Nominal system pressure (d2s1)
SI.MassFlowRatem_flow_nominalfrom_lbm_hr(138.4e6)Nominal total coolant flow rate (d2s1)
SI.TemperatureT_core_inlet_nominalfrom_degF(557.5)Nominal core inlet temperature (d2s1)
SI.TemperatureT_core_outlet_nominalfrom_degF(618.5)Nominal core inlet temperature (d2s1)
SI.TemperatureDifferenceT_core_avgRise_nominalT_core_outlet_nominal - T_core_inlet_nominalNominal core temperature rise (d2s1)
SI.TemperatureT_core_avg0.5*(T_core_outlet_nominal + T_core_inlet_nominal)Average temperature of core
SI.Lengthdimension_corefrom_feet(11.06)Equivalent core diameter (d2s1)
SI.Lengthlength_fuelfrom_feet(12)Core length between fuel ends (d2s1)
SI.Massm_uranium_181639Fuel weight of uranium (first core) (d2s1)
SIadd.NonDimnAssembly193Number of assemblies - 17x17 (d2s1)
StringMaterial_fuel"Uranium Oxide"Fuel pellet material
StringMaterial_cladding"Zircaloy-4"Cladding material
SI.Lengthr_outer_fuelRod0.5*from_inch(0.360)Outside diameter of fuel rod (d3s1)
SI.Lengthth_clad_fuelRodfrom_inch(0.0225)Cladding thickness of fuel rod (d3s1)
SI.Lengthth_gap_fuelRod0.5*from_inch(0.0062)Gap thickness between pellet and cladding (d3s1)
SI.Lengthr_pellet_fuelRod0.5*from_inch(0.3088)Pellet radius (d3s1)
SI.Lengthpitch_fuelRodfrom_inch(0.496)Fuel rod pitch (d3s1)
SIadd.NonDimsizeAssembly17square size of assembly (e.g., 17 = 17x17)
SIadd.NonDimnRodFuel_assembly264# of fuel rods per assembly (d3s1)
SIadd.NonDimnRodNonFuel_assemblysizeAssembly^2 - 264# of non-fuel rods per assembly (d3s1)
SI.Lengthlength_inlet_plenumlength_fuelLength of core inlet plenum
SI.AreacrossArea_inlet_plenum0.25*Modelica.Constants.pi*dimension_core^2Cross area of inlet plenum
SI.Lengthlength_outlet_plenumlength_fuelLength of core outlet plenum
SI.AreacrossArea_outlet_plenum0.25*Modelica.Constants.pi*dimension_core^2Cross area of outlet plenum
SI.Lengthlength_downcomerlength_inlet_plenum + length_fuel + length_outlet_plenumDowncomer length
SI.AreacrossArea_downcomerModelica.Constants.pi*0.25*(from_inch(10*12 + 11)^2 - from_inch(10*12 + 3)^2)Estimated flow area of downcomer from nozzle faces (d4s1)
SI.Lengthperimeter_downcomerModelica.Constants.pi*(from_inch(10*12 + 11) + from_inch(10*12 + 3))Estimated perimeter of downcomer
SI.Heightpressurizer_level1.68nominal pressurizer level
Units.NonDimpressurizer_Vfrac_liquid0.34nominal fraction of liquid in pressurizer
SI.Lengthdimension_pzrfrom_inch(7*12 + 8)Pressurizer diameter (d5s1)
SI.Lengthth_pzrfrom_inch(12)Guess of pressurizer wall thickness
SI.Lengthlength_pzrfrom_inch(52*12 + 9)Pressurizer height (d5s1)
SI.VolumeV_pzr0.25*Modelica.Constants.pi*dimension_pzr^2*length_pzrEmpty volume of pressurizer (d5s1)
SI.VolumeV_water_pzr_nominalfrom_feet3(1080)Pressurizer nominal water volume (d5s1)
SI.VolumeV_steam_pzr_nominalV_pzr - V_water_pzr_nominalPressurizer nominal steam volume (d5s1)
SIadd.NonDimVfrac_liquid_pzrV_water_pzr_nominal/V_pzrNominal volume fraction of pressurizer
RealnSG4Total number of steam generators (i.e., 4 loops and 1 per loop)
StringMaterial_SGtube"Inconel (d6s1)"
SI.Pressurep_shellSidefrom_psi(1000)Shell side full load pressure (d6s1)
SI.TemperatureT_inlet_shellsat.Tsat - 100Guess at inlet shell temperature from FWH
SI.SpecificEnthalpyh_inlet_shellMedium.specificEnthalpy_pT(p_shellSide, T_inlet_shell)Guess at inlet shell temperature from FWH
SI.MassFlowRatem_flow_shellSide_perfrom_lbm_hr(3.813e6)Steam flow per steam generator (d6s1)
SI.MassFlowRatem_flow_shellSide_totalm_flow_shellSide_per*nSGTotal Steam flow to steam generators
SI.Lengthlength_SGshellfrom_inch(67*12 + 8)Overall height of steam generator (d6s2)
SI.Lengthlength_lowerShell0.67*length_SGshellEstimate of vertical length of lower shell
SI.Lengthlength_upperShelllength_SGshell - length_lowerShellEstimate of vertical length of upper shell
SI.Lengthdiameter_outer_lowerShellfrom_inch(11*12 + 3)Lower shell outer diameter (d6s1)
SI.Lengthdiameter_outer_upperShellfrom_inch(14*12 + 7.75)Upper shell outer diameter (d6s1)
SI.Lengthr_outer_upperShell_eff0.5*diameter_outer_upperShell*sqrt(nSG)Upper shell outer radius effective based on nSG steam generators lumped together
SI.Lengthth_shellfrom_inch(8)Estimate of shell thickness (s2 picture)
SI.Lengthdiameter_inner_lowerShelldiameter_outer_lowerShell - 2*th_shellLower shell inner diameter (d6s1)
SI.Lengthdiameter_inner_upperShelldiameter_outer_upperShell - 2*th_shellUpper shell inner diameter (d6s1)
SI.AreacrossArea_SG_downcomer0.2*nSG*0.25*Modelica.Constants.pi*(diameter_outer_lowerShell^2 - diameter_outer_SGtube^2*nTubes)Estimate of SG downcomer cross area (0.2 of available)
SI.Volumevolume_SG_downcomercrossArea_SG_downcomer*length_lowerShellEstimate of volume for SG downcomer
RealnTubes6500# of tubes in SG, estimate based on available area
SI.Lengthlength_SGtube2*length_lowerShellEstimate of SG tube length
SI.Lengthdiameter_outer_SGtube0.0222SG tube outer diameter (d1s2)
SI.Lengthth_SGtube0.00127SG tube thickness (d1s2)
SI.Lengthdiameter_inner_SGtubediameter_outer_SGtube - 2*th_SGtubeSG tube inner diameter
Medium.SaturationPropertiessatMedium.setSat_p(p_shellSide)Properties of saturated fluid
Medium.ThermodynamicStatebubbleMedium.setBubbleState(sat, 1)Bubble point state
Medium.ThermodynamicStatedewMedium.setDewState(sat, 1)Dew point state
Medium.SpecificEnthalpyh_lsatbubble.hSaturated liquid temperature
Medium.SpecificEnthalpyh_vsatdew.hSaturated vapour temperature

Contents

NameDescription
Medium