OMC

modelPartialHeatTransfer_setT

Base model

Diagram of PartialHeatTransfer_setT

Parameters

Type	Name	Default	Description
Internal Interface
Real	nParallel	1	Number of parallel components
Integer	nHT	1	Number of heat transfer segments
Integer	flagIdeal	0	Flag for models to handle ideal boundary
Internal Interface › Initialization
SI.Temperature[nHT]	Ts_start
Advanced
SI.ReynoldsNumber	Re_lam	2300	Laminar transition Reynolds number
SI.ReynoldsNumber	Re_turb	4000	Turbulent transition Reynolds number
Units.NonDim[nHT]	CF	fill(1.0, nHT)	Correction Factor: Q = CFalphaA*dT

Connectors

Type	Name	Default	Description
HeatAndMassTransfer.Interfaces.HeatPort_Flow[nHT]	heatPorts

Components

Type	Name	Default	Description
Medium.ThermodynamicState[nHT]	states		Thermodynamic state of fluid
SI.Velocity[nHT]	vs		Fluid Velocity
SI.Diameter[nHT]	dimensions		Characteristic dimension (e.g. hydraulic diameter)
SI.Area[nHT]	crossAreas		Cross sectional flow area
SI.Length[nHT]	dlengths		Characteristic length of heat transfer segment
SI.Height[nHT]	roughnesses		Average height of surface asperities
SI.Area[nHT]	surfaceAreas		Surface area for heat transfer
SI.Temperature[nHT]	Ts_fluid	Medium.temperature(states)	Fluid temperature
SI.Temperature[nHT]	Ts_wall	heatPorts.T	Wall temperature
SI.MassFlowRate[nHT]	m_flows		Fluid mass flow rate
SI.ReynoldsNumber[nHT]	Res		Reynolds number
SI.PrandtlNumber[nHT]	Prs		Prandtl number
SI.CoefficientOfHeatTransfer[nHT]	alphas		Coefficient of heat transfer
SI.NusseltNumber[nHT]	Nus		Nusselt number
SI.HeatFlowRate[nHT]	Q_flows	heatPorts.Q_flow/nParallel	Heat flow rate

Contents

Name	Description
Medium