| Real | nParallel (from PartialPump_Simple) | 1 | # of parallel components |
| SI.VolumeFlowRate | V_flow_nominal | m_flow_nominal/d_nominal | |
| SI.Height | head_nominal | dp_nominal/(d_nominal*Modelica.Constants.g_n) | |
| SI.Density | d_start | Medium.density_phX(p_a_start, h_a_start, X_start) | Density |
| SI.Power | W_nominal | V_flow_nominal*dp_nominal | |
| SI.VolumeFlowRate | V_flow_start | m_flow_start/d_start | |
| SI.Height | head_start | (p_b_start - p_a_start)/Modelica.Constants.g_n/d_start | |
| Initialization › Start Value: Absolute Pressure |
| Medium.AbsolutePressure | p_a_start (from PartialPump_Simple) | Medium.p_default | Pressure at port a |
| Medium.AbsolutePressure | p_b_start (from PartialPump_Simple) | p_a_start | Pressure at port b |
| Initialization › Start Value: Temperature |
| Boolean | use_T_start (from PartialPump_Simple) | true | Use T_start if true, otherwise h_start |
| Medium.Temperature | T_a_start (from PartialPump_Simple) | Medium.T_default | Temperature at port a |
| Medium.Temperature | T_b_start (from PartialPump_Simple) | T_a_start | Temperature at port b |
| Initialization › Start Value: Specific Enthalpy |
| Medium.SpecificEnthalpy | h_a_start (from PartialPump_Simple) | Medium.specificEnthalpy_pTX(p_a_start, T_a_start, X_start) | Specific enthalpy at port a |
| Medium.SpecificEnthalpy | h_b_start (from PartialPump_Simple) | Medium.isentropicEnthalpy(p_b_start, Medium.setState_phX(p_a_start, h_a_start, X_start)) | Specific enthalpy at port b |
| Initialization › Start Value: Mass Fractions |
| Medium.MassFraction[Medium.nX] | X_start (from PartialPump_Simple) | Medium.X_default | Mass fractions m_i/m |
| Initialization › Start Value: Trace Substances |
| Medium.ExtraProperty[Medium.nC] | C_start (from PartialPump_Simple) | fill(0, Medium.nC) | Trace substances |
| Initialization › Start Value: Mass Flow Rate |
| Medium.MassFlowRate | m_flow_start (from PartialPump_Simple) | 0 | Mass flow rate |
| Advanced |
| Boolean | allowFlowReversal (from PartialPump_Simple) | true | = true to allow flow reversal, false restricts to design direction (port_a -> port_b) |
| Visualization |
| Boolean | showName (from PartialPump_Simple) | true | |
| Nominal Conditions: Single pump basis |
| SI.AngularVelocity | omega_nominal | 1500 | Pump speed |
| SI.Length | diameter_nominal | 0.1524 | Impeller diameter |
| SI.PressureDifference | dp_nominal | p_b_start - p_a_start | Pressure increase |
| SI.MassFlowRate | m_flow_nominal | m_flow_start/nParallel | Mass flow rate |
| SI.Density | d_nominal | d_start | Density |
