modelPump_PressureBooster
Prescribes mass flow rate across the component
Information
This component prescribes the flow rate passing through it. The change of
specific enthalpy due to the pressure difference between the inlet and the
outlet is ignored; use Pump models if this has to be taken into account correctly.
Modelling options
If w0Fix is set to true, the flowrate is given by the parameter w0; otherwise, the in_w0 connector must be wired, providing the (possibly varying) flowrate value.
Parameters
| Type | Name | Default | Description |
|---|
| Boolean | use_input | false | Use connector input for outlet pressure |
| SI.Pressure | p_nominal | 1e5 | Nominal outlet pressure (port_b.p) |
| Advanced |
| Boolean | allowFlowReversal | true | = true to allow flow reversal, false restricts to design direction |
Components
| Type | Name | Default | Description |
|---|
| SI.Pressure | p | | Outlet pressure (port_b.p) |
Contents
| Name | Description |
|---|
 Medium | Medium model |
