modelRelapComparison_LinA

Parameters

Type	Name	Default	Description
Integer	iTest	4	Set test number to change test run
String[4]	test_type	{"lowQuality_10", "highQuality_10", "lowQuality_100", "highQuality_100"}
SIadd.MassFlux[4]	Gs	{10, 10, 100, 100}
SI.HeatFlux[4]	Qs_pp	{5e2, 4e3, 5e3, 4e4}
SIadd.MassFlux	G	Gs[iTest]
SI.HeatFlux	Q_pp	Qs_pp[iTest]
Integer	nV	50
Integer	nR	5
SI.Length	D_hyd	0.015
SI.Area	area	0.25Modelica.Constants.piD_hyd^2
SI.Length	length	20
SI.Angle	angle	Modelica.Constants.pi/2
SI.Length	roughness	5e-5
SI.Length	r_outer	7.5e-3
SI.MassFlowRate	m_flow_source	G*area
SI.Temperature	T_source	450
SI.Pressure	p_sink	5e6
SI.SpecificEnthalpy	h_sink	Medium.dewEnthalpy(Medium.setSat_p(p_sink))
SI.Area	surfaceArea	Modelica.Constants.piD_hydlength
SI.Power	Q_gen	Q_ppsurfaceArea/(nVnR)

Type	Name	Default	Description
Modelica.Blocks.Interfaces.RealInput	u
Modelica.Blocks.Interfaces.RealOutput	y

Type	Name	Description
TRANSFORM.Fluid.BoundaryConditions.MassFlowSource_T	source
TRANSFORM.Fluid.BoundaryConditions.Boundary_ph	sink
TRANSFORM.Fluid.Pipes.GenericPipe_MultiTransferSurface	pipe	{sum(wall.geometry.crossAreas_1[end, :])/pipe.nV*wall.nParallel}
TRANSFORM.Fluid.FittingsAndResistances.SpecifiedResistance	resistance
TRANSFORM.HeatAndMassTransfer.DiscritizedModels.Conduction_2D	wall
TRANSFORM.HeatAndMassTransfer.BoundaryConditions.Heat.Adiabatic_multi	adiabatic
TRANSFORM.HeatAndMassTransfer.BoundaryConditions.Heat.Adiabatic_multi	adiabatic1
TRANSFORM.HeatAndMassTransfer.BoundaryConditions.Heat.Adiabatic_multi	adiabatic2
Modelica.Blocks.Sources.Ramp	ramp
Modelica.Blocks.Sources.Constant	const
Modelica.Blocks.Sources.RealExpression	realExpression
Modelica.Blocks.Math.Add	add

Name	Description
Medium