modelalpha_Chen_SvsRe

Extends from TRANSFORM.Icons.Example (Icon for runnable examples).

Parameters

TypeNameDefaultDescription
BooleanspanQualityfalsetrue to span from saturated liquid to saturated vapor (create F vs 1/X_tt plot)
BooleanspanFluxtruetrue to span over flux range (to create S vs Re_tp plot). Must change number of simulation intervals to a large number (e.g., 1e4) to capture plot
SI.Pressurep1e5Absolute pressure
SI.SpecificEnthalpyh_start5e5Initial enthalpy value
SI.SpecificEnthalpyh_end2e6Final enthalpy value
SI.LengthD1.0Hydraulic diameter
Units.MassFluxG_start0Total mass flow rate
Units.MassFluxG_end5000Total mass flow rate
SI.TemperatureTwall400Wall temperature

Components

TypeNameDefaultDescription
SI.SpecificEnthalpydhEnthalpy range
SI.SpecificEnthalpyhEnthalpy
Units.MassFluxGTotal mass flow rate
Units.NonDimx_thThermodynmic quality
Units.NonDimx_absSteam quality (0<x<1)
Medium.ThermodynamicStatestateThermodynamic states
Medium.SaturationPropertiessatProperties of saturated fluid
Medium.ThermodynamicStatebubbleBubble point state
Medium.ThermodynamicStatedewDew point state
Medium.SpecificEnthalpyh_fsatSaturated liquid temperature
Medium.SpecificEnthalpyh_gsatSaturated vapour temperature
SI.Densityrho_fsatSaturated liquid density
Medium.DynamicViscositymu_fsatDynamic viscosity at bubble point
Medium.ThermalConductivitylambda_fsatThermal conductivity at bubble point
Medium.SpecificHeatCapacitycp_fsatSpecific heat capacity at bubble point
Medium.SurfaceTensionsigmaSurface tension
SI.Densityrho_gsatSaturated vapour density
Medium.DynamicViscositymu_gsatDynamic viscosity at dew point
Medium.ThermalConductivityk_gsatThermal conductivity at dew point
Medium.SpecificHeatCapacitycp_gsatSpecific heat capacity at dew point
SI.SpecificEnthalpyh_fgLatent heat of vaporization
SI.TemperatureDifferenceDelta_TsatSaturation temperature difference (Twall-Tsat)
SI.PressureDifferenceDelta_psatSaturation pressure difference (psat(Twall)-psat(Tsat))
SI.CoefficientOfHeatTransferalphaHeat transfer coefficient
RealX_tt_invInverse of the Martenelli Parameter
RealFCorrection factor for two-phase impact on liquid-phase convection
RealSNucleare boiling suppresion factor
RealRe_tpTwo-phase Reynolds number
Utilities.ErrorAnalysis.UnitTestsunitTests

Contents

NameDescription
Medium