modelPartial_BaseFDCond_Cylinder

Diagram of Partial_BaseFDCond_CylinderOpen the diagram

Parameters

TypeNameDefaultDescription
Booleanuse_q_pppfalseToggle volumetric heat generation interface
IntegernR2Nodes in radial direction
IntegernZ2Nodes in axial direction
Advanced › Dynamics
Modelica.Fluid.Types.DynamicsenergyDynamicsModelica.Fluid.Types.Dynamics.DynamicFreeInitialFormulation of energy balances
Initialization
SI.TemperatureTref273.15Center nodes initial temperature
SI.Temperature[nR,nZ]Ts_startfill(Tref, nR, nZ)

Connectors

TypeNameDefaultDescription
Modelica.Blocks.Interfaces.RealInputq_ppp_inputVolumetric heat generation
Modelica.Fluid.Interfaces.HeatPorts_aheatPorts_innerHeat interface on inner boundary
Modelica.Fluid.Interfaces.HeatPorts_aheatPorts_outerHeat interface on outer boundary
Modelica.Fluid.Interfaces.HeatPorts_aheatPorts_bottomHeat interface on bottom boundary
Modelica.Fluid.Interfaces.HeatPorts_aheatPorts_topHeat interface on top boundary

Components

TypeNameDefaultDescription
SI.Lengthr_inner0Centerline/Inner radius of cylinder or specify rs
SI.Lengthr_outerOuter radius of cylinder or specify rs
SI.LengthlengthLength of cylinder or specify zs
SI.Length[nR]rsif nR == 1 then {0.5*(r_inner + r_outer)} else linspace(r_inner, r_outer, nR)Define radial nodal positions
SI.Length[nZ]zsif nZ == 1 then {0.5*length} else linspace(0, length, nZ)Define axial nodal positions

Contents

NameDescription
Material