modelSinkMdot
Mass sink for current working fluid
Extends from ThermoCycle.Icons.Water.SourceP.
Information
Model SinkMdot sets the boundary mass flow of the fluid flowing from the port to the model (i.e. into the model).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.MassFlowRate | Mdot_0 | 0 | Imposed volumetric flow rate |
| Medium.SpecificEnthalpy | h_0 | 1e5 | Nominal specific enthalpy |
| Medium.AbsolutePressure | pstart | 1E6 | Start value for the pressure |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.MassFlowRate | Mdot | ||
| Modelica.SIunits.SpecificEnthalpy | h | ||
| Interfaces.Fluid.FlangeB | flangeB | ||
| Modelica.Blocks.Interfaces.RealInput | h_in | ||
| Modelica.Blocks.Interfaces.RealInput | Mdot_in |
Contents
| Name | Description |
|---|---|
| Medium |