modelSinkVdot
Volumetric flow sink for current working fluid
Extends from ThermoCycle.Icons.Water.SourceP.
Information
Model SinkVdot sets the boundary volume flow rate of the fluid flowing from the port to the model (i.e. into the model).
The volume flow rate can be set as a parameter or defined by the connector.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.VolumeFlowRate | Vdot_0 | 0.0017 | Imposed volumetric flow rate |
| Medium.SpecificEnthalpy | h_out | 1e5 | Nominal specific enthalpy |
| Medium.AbsolutePressure | pstart | 1E6 | Start value for the pressure |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Interfaces.Fluid.FlangeB | flangeB | ||
| Modelica.Blocks.Interfaces.RealInput | in_Vdot |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Medium.AbsolutePressure | p | pressure of the fluid coming in | |
| Medium.SpecificEnthalpy | h | enthalpy of the fluid coming in | |
| Medium.Density | rho | density of the fluid coming in | |
| Modelica.SIunits.SpecificVolume | Vdot |
Contents
| Name | Description |
|---|---|
| Medium |