modelPdrop
Valve assuming a linear dependency between Mdot and DELTAp
Extends from ThermoCycle.Icons.Water.PressDrop.
Information
This very simple model assumes a non-compressible flow for computing the pressure drop
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| PressureDrops | DPtype | PressureDrops.UD | |
| Modelica.SIunits.MassFlowRate | Mdot_max | 0.1 | maximum flow rate with valve fully open at DELTAp_max |
| Modelica.SIunits.Pressure | DELTAp_max | 20E5 | |
| Initialization | |||
| Modelica.SIunits.Pressure | p_su_start | 1e5 | Inlet pressure start value |
| Modelica.SIunits.Pressure | DELTAp_start | 10000 | Start value for the pressure drop |
| Modelica.SIunits.MassFlowRate | Mdot_start | 0.1 | Mass flow rate intial value |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.MassFlowRate | Mdot | ||
| Modelica.SIunits.Pressure | DELTAp | ||
| Interfaces.Fluid.FlangeA | InFlow | ||
| Interfaces.Fluid.FlangeB | OutFlow |
Contents
| Name | Description |
|---|---|
| Medium |