| HTtypes | HTtype | HTtypes.LiqVap | Select type of heat transfer coefficient |
| Real | pi | Modelica.Constants.pi | pi-greco |
| Modelica.SIunits.Volume | Vi | | Volume of a single cell |
| Modelica.SIunits.Area | Ai | | Lateral surface of a single cell |
| Modelica.SIunits.MassFlowRate | Mdotnom | | Nominal fluid flow rate |
| Modelica.SIunits.CoefficientOfHeatTransfer | Unom_l | | if HTtype = LiqVap : Heat transfer coefficient, liquid zone |
| Modelica.SIunits.CoefficientOfHeatTransfer | Unom_tp | | if HTtype = LiqVap : heat transfer coefficient, two-phase zone |
| Modelica.SIunits.CoefficientOfHeatTransfer | Unom_v | | if HTtype = LiqVap : heat transfer coefficient, vapor zone |
| Initialization |
| Modelica.SIunits.Pressure | pstart | | Fluid pressure start value |
| Medium.Temperature | Tstart | | Inlet temperature start value |
| Medium.SpecificEnthalpy | hstart | Medium.specificEnthalpy_pT(pstart, Tstart) | Start value of enthalpy (initialized by default) |
| Numerical options |
| Discretizations | Discretization | ThermoCycle.Functions.Enumerations.Discretizations.centr_diff | Selection of the spatial discretization scheme |
| Boolean | Mdotconst | false | Set to yes to assume constant mass flow rate at each node (easier convergence) |
| Boolean | max_der | false | Set to yes to limit the density derivative during phase transitions |
| Boolean | filter_dMdt | false | Set to yes to filter dMdt with a first-order filter |
| Real | max_drhodt | 100 | Maximum value for the density derivative |
| Modelica.SIunits.Time | TT | 1 | Integration time of the first-order filter |
| Initialization › Intialization options |
| Boolean | steadystate | true | if true, sets the derivative of h (working fluids enthalpy in each cell) to zero during Initialization |
