| Integer | N | 5 | Number of nodes for the heat exchanger |
| Modelica.SIunits.Volume | Vhot | 0.03781 | Volume hot fluid |
| Modelica.SIunits.Volume | Vcold | 0.03781 | Volume cold fluid |
| Modelica.SIunits.Area | Ahot | 16.18 | Area hot fluid |
| Modelica.SIunits.Area | Acold | 16.18 | Area cold fluid |
| Modelica.SIunits.Mass | M_wall | 69 | Mass of the metal wall between the two fluids |
| Modelica.SIunits.SpecificHeatCapacity | c_wall | 500 | Specific heat capacity of metal wall |
| Modelica.SIunits.MassFlowRate | MdotNom_Hot | 0.2588 | Nominal flow rate of hot fluid |
| Modelica.SIunits.MassFlowRate | MdotNom_Cold | 0.2588 | Nominal flow rate of cold fluid |
| General › Heat transfer |
| HTtypes | HTtypeCold | HTtypes.LiqVap | Cold fluid: Choose heat transfer coeff. type. Set LiqVap with Unom_l=Unom_tp=Unom_v to have a Const HT |
| Modelica.SIunits.CoefficientOfHeatTransfer | Unom_l_cold | 100 | if HTtype = LiqVap: heat transfer coefficient, liquid zone |
| Modelica.SIunits.CoefficientOfHeatTransfer | Unom_tp_cold | 100 | if HTtype = LiqVap: heat transfer coefficient, two-phase zone |
| Modelica.SIunits.CoefficientOfHeatTransfer | Unom_v_cold | 100 | if HTtype = LiqVap: heat transfer coefficient, vapor zone |
| HTtypes | HTtypeHot | HTtypes.LiqVap | Hot fluid: Choose heat transfer coeff. type. Set LiqVap with Unom_l=Unom_tp=Unom_v to have a Const HT |
| Modelica.SIunits.CoefficientOfHeatTransfer | Unom_l_hot | 100 | if HTtype = LiqVap: heat transfer coefficient, liquid zone |
| Modelica.SIunits.CoefficientOfHeatTransfer | Unom_tp_hot | 100 | if HTtype = LiqVap: heat transfer coefficient, two-phase zone |
| Modelica.SIunits.CoefficientOfHeatTransfer | Unom_v_hot | 100 | if HTtype = LiqVap: heat transfer coefficient, vapor zone |
| Initialization |
| Modelica.SIunits.Pressure | pstart_cold | 23.57e5 | Nominal inlet pressure of cold fluid |
| Modelica.SIunits.Pressure | pstart_hot | 1.54883e5 | Nominal inlet pressure of hot fluid |
| Modelica.SIunits.Temperature | Tstart_inlet_cold | 308.43 | Initial value of cold fluid temperature at the inlet |
| Modelica.SIunits.Temperature | Tstart_outlet_cold | 334.78 | Initial value of cold fluid temperature at the outlet |
| Modelica.SIunits.Temperature | Tstart_inlet_hot | 353.82 | Initial value of hot fluid temperature at the inlet |
| Modelica.SIunits.Temperature | Tstart_outlet_hot | 316.91 | Initial value of hot fluid temperature at the outlet |
| Initialization › Intialization options |
| Boolean | steadystate_h_cold | false | if true, sets the derivative of h of cold fluid to zero during Initialization |
| Boolean | steadystate_h_hot | false | if true, sets the derivative of h of hot fluid to zero during Initialization |
| Boolean | steadystate_T_wall | false | if true, sets the derivative of T_wall to zero during Initialization |
| Numerical options |
| Discretizations | Discretization | ThermoCycle.Functions.Enumerations.Discretizations.centr_diff | Selection of the spatial discretization scheme |
| Boolean | Mdotconst_cold | false | Set to yes to assume constant mass flow rate of cold fluid at each node (easier convergence) |
| Boolean | max_der_cold | false | Set to yes to limit the density derivative of cold fluid during phase transitions |
| Boolean | filter_dMdt_cold | false | Set to yes to filter dMdt of cold fluid with a first-order filter |
| Real | max_drhodt_cold | 100 | Maximum value for the density derivative of primary fluid |
| Modelica.SIunits.Time | TT_cold | 1 | Integration time of the first-order filter |
| Boolean | Mdotconst_hot | false | Set to yes to assume constant mass flow rate of hot fluid at each node (easier convergence) |
| Boolean | max_der_hot | false | Set to yes to limit the density derivative of primary fluid during phase transitions |
| Boolean | filter_dMdt_hot | false | Set to yes to filter dMdt of hot fluid with a first-order filter |
| Real | max_drhodt_hot | 100 | Maximum value for the density derivative of primary fluid |
| Modelica.SIunits.Time | TT_hot | 1 | Integration time of the first-order filter |
