| Integer | N | 5 | Number of cells |
| Modelica.SIunits.Area | A | 16.18 | Lenght of the tube |
| Modelica.SIunits.Volume | V | 0.03781 | Heat exchanger internal volume, cold fluid side |
| Modelica.SIunits.Mass | M_wall | 69 | Wall mass |
| Modelica.SIunits.SpecificHeatCapacity | c_wall | 503 | Specific heat capacity of the metal |
| Modelica.SIunits.MassFlowRate | Mdotnom | 0.2588 | Nominal fluid flow rate |
| Modelica.SIunits.CoefficientOfHeatTransfer | Unom | 100 | Heat transfer coefficient for the hot and cold side |
| Initialization |
| Modelica.SIunits.Temperature | Tstart_wall_left | 344.15 | Wall temperature start value - first node |
| Modelica.SIunits.Temperature | Tstart_wall_right | 312.67 | Wall temperature start value - last node |
| Modelica.SIunits.Temperature[N] | Tstart_wall | linspace(Tstart_wall_left, Tstart_wall_right, N) | Start value of temperature vector (initialized by default) |
| Modelica.SIunits.SpecificEnthalpy | hstart_left | 400000 | Inlet working fluid enthalpy start value |
| Modelica.SIunits.SpecificEnthalpy | hstart_right | 250000 | Outlet enthalpy start value |
| Modelica.SIunits.Pressure | pstart_h | 1.54883e5 | Hot fluid pressure start value |
| Modelica.SIunits.Temperature | Tstart_wf_h_left | 353.82 | Hot fluid temperature start value - first node |
| Modelica.SIunits.Temperature | Tstart_wf_h_right | 316.91 | Hot fluid temperature start value - last node |
| Modelica.SIunits.Temperature[N] | Tstart_wf_h | linspace(Tstart_wf_h_left, Tstart_wf_h_right, N) | Start value of temperature vector (initialized by default) |
| Modelica.SIunits.SpecificEnthalpy[N] | hstart_h | linspace(hstart_left, hstart_right, N) | Start value of enthalpy vector (initialized by default) |
| Modelica.SIunits.Pressure | pstart_c | 23.57e5 | Cold fluid pressure start value |
| Modelica.SIunits.Temperature | Tstart_wf_c_left | 334.78 | Cold fluid temperature start value - first node |
| Modelica.SIunits.Temperature | Tstart_wf_c_right | 308.43 | Cold fluid temperature start value - last node |
| Modelica.SIunits.Temperature[N] | Tstart_wf_c | linspace(Tstart_wf_c_left, Tstart_wf_c_right, N) | Start value of temperature vector (initialized by default) |
| Modelica.SIunits.SpecificEnthalpy[N] | hstart_c | linspace(hstart_left, hstart_right, N) | Start value of enthalpy vector (initialized by default) |
| Numerical options |
| Boolean | Mdotconst | false | Set to yes to assume constant mass flow rate at each node (easier convergence) |
| Boolean | max_der | false | Set to yes to limit the density derivative during phase transitions |
| Boolean | average_Tcell | true | Set to yes to impose the cell enthalpy as the average of the surrounding nodes enthalpies |
| Boolean | filter_dMdt | false | Set to yes to filter dMdt with a first-order filter |
| Real | max_drhodt | 100 | Maximum value for the density derivative |
| Modelica.SIunits.Time | TT | 1 | Integration time of the first-order filter |
| Initialization › Intialization options |
| Boolean | steadystate_h | true | if true, sets the derivative of h (working fluids enthalpy in each cell) to zero during Initialization |
| Boolean | steadystate_T_wall | true | if true, sets the derivative of T_wall to zero during Initialization |
