| Integer | N | 5 | Number of nodes for the heat exchanger |
| Modelica.SIunits.Volume | V_sf | 0.03781 | Volume secondary fluid |
| Modelica.SIunits.Volume | V_wf | 0.03781 | Volume primary fluid |
| Modelica.SIunits.Area | A | 16.18 | Heat transfer area |
| Modelica.SIunits.Mass | M_wall | 69 | Mass of the metal wall between the two fluids |
| Modelica.SIunits.SpecificHeatCapacity | c_wall | 500 | Specific heat capacity of metal wall |
| Modelica.SIunits.MassFlowRate | Mdotnom_sf | 3 | Nominal flow rate of secondary fluid |
| Modelica.SIunits.MassFlowRate | Mdotnom_wf | 0.2588 | Nominal flow rate of working fluid |
| General › Heat transfer |
| ThermoCycle.Functions.Enumerations.HT_sf | HTtype_sf | HT_sf.Const | Secondary fluid: Choose heat transfer coeff |
| Modelica.SIunits.CoefficientOfHeatTransfer | Unom_sf | 369 | Coefficient of heat transfer, secondary fluid |
| HTtypes | HTtype_wf | HTtypes.LiqVap | Working fluid: Choose heat transfer coeff. type. Set LiqVap with Unom_l=Unom_tp=Unom_v to have a Const HT |
| Modelica.SIunits.CoefficientOfHeatTransfer | Unom_l | 300 | if HTtype = LiqVap: heat transfer coefficient, liquid zone |
| Modelica.SIunits.CoefficientOfHeatTransfer | Unom_tp | 700 | if HTtype = LiqVap: heat transfer coefficient, two-phase zone |
| Modelica.SIunits.CoefficientOfHeatTransfer | Unom_v | 400 | if HTtype = LiqVap: heat transfer coefficient, vapor zone |
| Initialization |
| Modelica.SIunits.Pressure | pstart_wf | 23.57e5 | Nominal inlet pressure of working fluid |
| Modelica.SIunits.Temperature | Tstart_inlet_wf | 334.9 | Initial value of working fluid temperature at the inlet |
| Modelica.SIunits.Temperature | Tstart_outlet_wf | 413.15 | Initial value of working fluid temperature at the outlet |
| Modelica.SIunits.Temperature | Tstart_inlet_sf | 418.15 | Initial value of secondary fluid temperature at the inlet |
| Modelica.SIunits.Temperature | Tstart_outlet_sf | 408.45 | Initial value of secondary fluid temperature at the outlet |
| Initialization › Intialization options |
| Boolean | steadystate_T_sf | false | if true, sets the derivative of T_sf (secondary fluids Temperature in each cell) to zero during Initialization |
| Boolean | steadystate_h_wf | false | if true, sets the derivative of h of primary fluid (working fluids enthalpy in each cell) to zero during Initialization |
| Boolean | steadystate_T_wall | false | if true, sets the derivative of T_wall to zero during Initialization |
| Numerical options |
| Discretizations | Discretization | ThermoCycle.Functions.Enumerations.Discretizations.centr_diff | Selection of the spatial discretization scheme |
| Boolean | Mdotconst_wf | false | Set to yes to assume constant mass flow rate of primary fluid at each node (easier convergence) |
| Boolean | max_der_wf | false | Set to yes to limit the density derivative of primary fluid during phase transitions |
| Boolean | filter_dMdt_wf | false | Set to yes to filter dMdt of primary fluid with a first-order filter |
| Real | max_drhodt_wf | 100 | Maximum value for the density derivative of primary fluid |
| Modelica.SIunits.Time | TT_wf | 1 | Integration time of the first-order filter |
