modelNoFriction
No friction is applied
Extends from ThermoPower.Friction.Interfaces.FrictionBase1DFEM (Friction base model for 1DFEM components).
Information
No friction is applied;Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Length | Dhyd (from FrictionBase1DFEM) | Hydraulic Diameter (single element in parallel) | |
| SI.PerUnit | Kfc (from FrictionBase1DFEM) | Friction factor correction coefficient | |
| Integer | Nt (from FrictionBase1DFEM) | 1 | Number of tubes in parallel |
| Integer | N (from FrictionBase1DFEM) | 2 | Number of nodes for thermal variables |
| SI.Length | L (from FrictionBase1DFEM) | Tube length | |
| SI.Area | A (from FrictionBase1DFEM) | Cross-sectional area (single element in parallel) | |
| Medium.MassFlowRate | wnom (from FrictionBase1DFEM) | Nominal mass flowrate (total) | |
| SI.PressureDifference | dpnom (from FrictionBase1DFEM) | Nominal pressure drop | |
| SI.Length | omega_hyd (from FrictionBase1DFEM) | 4*A/Dhyd | Wet perimeter (single tube) |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Medium.ThermodynamicState | fluidState (from FrictionBase1DFEM) | Thermodynamic state of the fluid at the nodes | |
| Medium.MassFlowRate[N] | w (from FrictionBase1DFEM) | Mass flowrate (single tube) | |
| Real[N] | Kf (from FrictionBase1DFEM) | Friction coefficient | |
| Real[N] | Cf (from FrictionBase1DFEM) | Fanning friction factor | |
| Boolean | NoFriction (from FrictionBase1DFEM) | =true, if no friction is used |
Revisions
- 18 Mar 2026
by Andrea Bartolini:
First release.