modelDoubleShaft_SE
Alternator group in configuration double-shaft (two generator)
Extends from ThermoPower.PowerPlants.ElectricGeneratorGroup.Interfaces.DoubleShaft (Base Class for alternator group, configuration double-shaft (two generator)).
Parameters
| Type | Name | Default | Description |
|---|
| SI.Frequency | fn (from DoubleShaft) | 50 | Nominal frequency of the grid |
| SI.Power | Pn (from DoubleShaft) | | Nominal power installed on the grid |
| Generator-Shaft A |
| Real | eta_A (from DoubleShaft) | 1 | Conversion efficiency of the electric generator |
| SI.MomentOfInertia | J_shaft_A (from DoubleShaft) | 0 | Total inertia of the steam turbogenerator |
| Real | d_shaft_A (from DoubleShaft) | 0 | Damping constant of the shaft |
| SI.AngularVelocity | omega_nom_A (from DoubleShaft) | 2*Modelica.Constants.pi*fn/2 | Nominal angular velocity of the shaft |
| SI.Power | Pmax_A | | Outlet maximum power |
| SI.Angle | delta_start_A | | Loaded angle start value |
| Generator-Shaft B |
| Real | eta_B (from DoubleShaft) | 1 | Conversion efficiency of the electric generator |
| SI.MomentOfInertia | J_shaft_B (from DoubleShaft) | 0 | Total inertia of the steam turbogenerator |
| Real | d_shaft_B (from DoubleShaft) | 0 | Damping constant of the shaft |
| SI.AngularVelocity | omega_nom_B (from DoubleShaft) | 2*Modelica.Constants.pi*fn/2 | Nominal angular velocity of the shaft |
| SI.Power | Pmax_B | | Outlet maximum power |
| SI.Angle | delta_start_B | | Loaded angle start value |
| Initialization |
| Boolean | SSInit (from DoubleShaft) | false | Steady-state initialization |
