modelTestConstantHeatTransferTwoGrid_Wcoarse
Test of the ConstantHeatTransferTwoGrid component with coarser grid on the wall side
Parameters
| Type | Name | Default | Description |
|---|
| Integer | Nf | 7 | Number of nodes on the fluid side |
| Integer | Nw | 3 | Number of nodes on the wallside |
| Integer | Nt | 1 | Number of tubes in parallel |
| SI.Distance | L | Nf - 1 | Tube length |
| SI.Area | A | 1e-3 | Cross-sectional area (single tube) |
| SI.Length | omega | 1 | Wet perimeter of heat transfer surface (single tube) |
| SI.CoefficientOfHeatTransfer | gamma | 1 | Constant heat transfer coefficient |
| SI.Length | Dhyd | 1e-4 | Hydraulic Diameter (single tube) |
| SI.MassFlowRate | wnom | 10 | Nominal mass flow rate (single tube) |
| Medium.AbsolutePressure | p | 1e6 | |
| Medium.SpecificEnthalpy | h_vap | 3.2e6 | |
| Real | u | 1 | For unit consistency |
| SI.Temperature | Tw_start | 300 + 273.15 | |
| SI.Temperature | Tw_end | 320 + 273.15 | |
| SI.Temperature | Tf_start | 300 + 273.15 | |
| SI.Temperature | Tf_end | 360 + 273.15 | |
Contents
| Name | Description |
|---|
 Medium | |
