modelFuelSourcePQ
Fuel source with fixed pressure and mass flow rate
Information
## Copyright © EDF 2002 - 2026 ## ThermoSysPro Version 4.2
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Units.SI.AbsolutePressure | P0 | 1e5 | Fuel pressure (active if pressure input port is not connected) |
| Units.SI.MassFlowRate | Q0 | 10 | Fuel mass flow rate (active if mass flow input port is not connected) |
| Units.SI.Temperature | T0 | 300 | Fuel temperature |
| Units.SI.SpecificEnergy | LHV | 48e6 | Lower heating value |
| Units.SI.SpecificHeatCapacity | Cp | 1e3 | Fuel specific heat capacity at 273.15K |
| Real | Hum | 0.0 | Fuel humidity (%) |
| Real | Xc | 0.75 | C mass fraction |
| Real | Xh | 0.25 | H mass fraction |
| Real | Xo | 0 | O mass fraction |
| Real | Xn | 0 | N mass fraction |
| Real | Xs | 0 | S mass fraction |
| Real | Xashes | 0 | Ashes mass fraction |
| Real | Vol | 0 | Volatile matter mass fraction |
| Units.SI.Density | rho | 0.72 | Fuel density |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Connectors.FuelOutlet | C | ||
| ThermoSysPro.InstrumentationAndControl.Connectors.InputReal | IMassFlow | ||
| InstrumentationAndControl.Connectors.InputReal | IPressure |
Revisions
Author Baligh El Hefni