modelSink

MultiFluids sink

Extends from ThermoSysPro.Fluid.Interfaces.PropertyInterfaces.FluidTypeVariableInterface (Interface to display the fluid type after simulation), ThermoSysPro.Fluid.Interfaces.IconColors (Colors of the static, singular and dynamic model icons).

Information

## Copyright © EDF 2002 - 2026   
## ThermoSysPro Version 4.2

Type	Name	Default	Description
Units.SI.Temperature	T0	290	Source temperature (active if option_temperature=true)
Units.SI.SpecificEnthalpy	h0	100000	Source specific enthalpy (active if option_temperature=false)
Boolean	option_temperature	false	true:temperature fixed - false:specific enthalpy fixed
Boolean	diffusion	false	true: energy balance equation with diffusion - false: energy balance equation without diffusion
Fluid › Fluid properties
IF97Region	region	IF97Region.All_regions	IF97 regions (active for IF97 water/steam only)

Type	Name	Default	Description
ThermoSysPro.Fluid.Interfaces.Connectors.FluidInlet	C
InstrumentationAndControl.Connectors.InputReal	ISpecificEnthalpyOrTemperature		Fixed specific enthalpy or temperature according to option_temperature

Type	Name	Default	Description
FluidType	ftype (from FluidTypeVariableInterface)		fluid type
Integer	fluid1 (from FluidTypeVariableInterface)	Integer(ftype)	Fluid number
Units.SI.MassFlowRate	Q		Fluid mass flow rate
Units.SI.AbsolutePressure	P		Fluid pressure
Units.SI.SpecificEnthalpy	h		Fluid specific enthalpy
Units.SI.Temperature	T		Fluid temperature
Integer	fluid	Integer(ftype)	Fluid number
Real	Xco2		CO2 mass fraction of the fluid crossing the boundary of the control volume
Real	Xh2o		H2O mass fraction of the fluid crossing the boundary of the control volume
Real	Xo2		O2 mass fraction of the fluid crossing the boundary of the control volume
Real	Xso2		SO2 mass fraction of the fluid crossing the boundary of the control volume

Authors  

Baligh El Hefni  
Daniel Bouskela