modelStaticCondenser

Static condenser

Extends from ThermoSysPro.Fluid.Interfaces.PropertyInterfaces.WaterSteamFluidTypeParameterInterface (Interface to display the water/steam fluid type after parametrization), ThermoSysPro.Fluid.Interfaces.IconColors (Colors of the static, singular and dynamic model icons).

Information

## Copyright © EDF 2002 - 2026   
## ThermoSysPro Version 4.2   
This component model is documented in Sect. 9.7.1 of the ThermoSysPro book.

Parameters

Type	Name	Default	Description
Units.SI.Area	SCO	10000	Heat exchange surface
Real	CPCE	0.02	Pressure loss coefficient for the water side (Pa.s²/(kg.m**3))
Units.SI.Height	z	0.5	Water level in the condenser
Units.SI.CoefficientOfHeatTransfer	KCO	1	Reference heat exchange coefficient
Units.SI.MassFlowRate	QC0	100	Reference mass flow rate
Units.SI.Temperature	Tref	293	Reference temperature
Real	COPR	1	Reference fouling coefficient
Real	COP	1	Actual fouling coefficient
Units.SI.MassFlowRate	gamma_diff	1e-4	Air diffusion conductance (active if diffusion=true in neighbouring volumes)
Boolean	continuous_flow_reversal	false	true: continuous flow reversal - false: discontinuous flow reversal
Boolean	diffusion	false	true: energy balance equation with diffusion - false: energy balance equation without diffusion
Fluid › Fluid properties
WaterSteamFluidType	wsftype (from WaterSteamFluidTypeParameterInterface)	WaterSteamFluidType.WaterSteam	Water/steam fluid type
IF97Region	region_ee	IF97Region.All_regions	IF97 region at the water inlet (active for IF97 water/steam only)
IF97Region	region_se	IF97Region.All_regions	IF97 region at the water outlet (active for IF97 water/steam only)
IF97Region	region_ex	IF97Region.All_regions	IF97 region at the extraction point (active for IF97 water/steam only)

Connectors

Type	Name	Description
ThermoSysPro.Fluid.Interfaces.Connectors.FluidInlet	Cee	Cooling water inlet
ThermoSysPro.Fluid.Interfaces.Connectors.FluidOutlet	Cse	Cooling water outlet
ThermoSysPro.Fluid.Interfaces.Connectors.FluidOutlet	Cex	Extraction water
ThermoSysPro.Fluid.Interfaces.Connectors.FluidInlet	Cvt	Turbine outlet
ThermoSysPro.Fluid.Interfaces.Connectors.FluidInlet	Cep	Drain inlet
ThermoSysPro.Fluid.Interfaces.Connectors.FluidInlet	Cev	Vapor inlet

Components

Type	Name	Default	Description
Units.SI.MassFlowRate	Qee		Cooling water mass flow rate at the inlet
Units.SI.SpecificEnthalpy	Hee		Cooling water specific anthalpy at the inlet
Units.SI.AbsolutePressure	Pee		Cooling water pressure at the inlet
Units.SI.MassFlowRate	Qep		Drain mass flow rate at the inlet
Units.SI.SpecificEnthalpy	Hep		Drain specific enthalpy at the inlet
Units.SI.MassFlowRate	Qev		Vapor mass flow rate at the inlet
Units.SI.SpecificEnthalpy	Hev		Vapor specific enthalpy at the inlet
Units.SI.MassFlowRate	Qvt		Vapor mass flow rate leaving the turbine
Units.SI.SpecificEnthalpy	Hvt		Vapor specific enthalpy leaving the turbine
Units.SI.MassFlowRate	Qse		Cooling water mass flow rate at the outlet
Units.SI.SpecificEnthalpy	Hse		Cooling water specific enthalpy at the outlet
Units.SI.AbsolutePressure	Pse		Cooling water pressure at the outlet
Units.SI.MassFlowRate	Qex		Drain mass flow rate at the outlet
Units.SI.SpecificEnthalpy	Hex		Drain specific enthalpy at the outlet
Units.SI.AbsolutePressure	Pex		Drain pressure at the outlet
Units.SI.SpecificEnthalpy	Hsate		Water specific enthalpy at the saturation point
Units.SI.AbsolutePressure	Pcond		Vapor pressure inside the condenser
Units.SI.Temperature	Tsat		Water temperature at the saturation point
Units.SI.Temperature	Tee		Cooling water temperature at the inlet
Units.SI.Temperature	Tse		Cooling water temperature at the outlet
Units.SI.Density	rho_ee		Cooling water density at the inlet
Units.SI.Density	rho_ex		Water density at the extraction point
Units.SI.CoefficientOfHeatTransfer	KT1		First reference value for the exchange coefficient
Units.SI.CoefficientOfHeatTransfer	KT2		Second reference value for the exchange coefficient
Units.SI.CoefficientOfHeatTransfer	XKCO		Heat transfer coefficient
Units.SI.SpecificEnthalpy	Hml		Extraction water average specific enthalpy
Units.SI.Power	W		Heat power released to the cold source
FluidType[5]	fluids		Fluids mixing in volume
Units.SI.Power	Jvt		Thermal power diffusion from inlet Cvt
Units.SI.Power	Jev		Thermal power diffusion from inlet Cev
Units.SI.Power	Jep		Thermal power diffusion from inlet Cep
Units.SI.Power	Jex		Thermal power diffusion from outlet Cex
Units.SI.Power	J		Total thermal power diffusion for the liquid in the cavity
Units.SI.MassFlowRate	gamma_vt		Diffusion conductance for inlet Cvt
Units.SI.MassFlowRate	gamma_ev		Diffusion conductance for inlet Cev
Units.SI.MassFlowRate	gamma_ep		Diffusion conductance for inlet Cep
Units.SI.MassFlowRate	gamma_ex		Diffusion conductance for outlet Cex
Real	rvt		Value of r(Q/gamma) for inlet Cvt
Real	rev		Value of r(Q/gamma) for inlet Cev
Real	rep		Value of r(Q/gamma) for inlet Cep
Real	rex		Value of r(Q/gamma) for outlet Cex
FluidType	ftype_p		Cooling pipe fluid type
Integer	fluid_p	Integer(ftype_p)	Cooling pipe fluid number
ThermoSysPro.Properties.WaterSteam.Common.ThermoProperties_ph	proex		Propriétés de l'eau
ThermoSysPro.Properties.WaterSteam.Common.ThermoProperties_ph	proee		Propriétés de l'eau
ThermoSysPro.Properties.WaterSteam.Common.ThermoProperties_ph	prose		Propriétés de l'eau
ThermoSysPro.Properties.WaterSteam.Common.PropThermoSat	lsat1
ThermoSysPro.Properties.WaterSteam.Common.PropThermoSat	vsat1

Revisions

Author  

Baligh El Hefni