.ThermofluidStream.Boundaries .ThermofluidStream.BoundariesThe boundaries are Sorces and Sinks, as well as Volumes, that are conceptually a source and a sink with extra equations and act as loop breakers in closes cycles, and therefore are also boundaries.
| Name | Description |
|---|---|
| Source | Boundary model of a source |
| Sink | Boundary model of sink |
| TerminalSource | Source that imposes m_flow = 0 |
| TerminalSink | Sink that imposes m_flow=0 |
| DynamicPressureInflow | Flow from a reference velocity through a certain cross section |
| DynamicPressureOutflow | Flow from a reference velocity through a certain cross section |
| Volume | Model of a vessel with fixed volume |
| VolumeFlex | Vessel that itself is subject to a bulk modulus |
| VolumeMix | Volume with N inlets that allows mixing |
| PhaseSeparator | Parent to receiver and accumulator models |
| PhaseSeparator2 | Phase separator with two outlets |
| Reservoir | Model of a reservoir |
| CreateState | Create state signal as output |
| Tests | Tests for the boundary package |
| Internal | Partials and Internal functions |
(c) 2020-2021, DLR, Institute of System Dynamics and Control