modelPartialValve
Partial implementation of a physical valve
Extends from Interfaces.SISOFlow (Base Model with basic flow eqautions for SISO).
Information
Partial implementation of a physical valve.
The interpretation of input u_in depends on
invertInput as follows.
-
invertInput = false(non-inverted): 0=closed, 1=open; -
invertInput = true(inverted): 0=open, 1=closed.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| String | instanceName (from DropOfCommonsPlus) | getInstanceName() | Instance name |
| Boolean | invertInput | false | = true, if input u_in is inverted |
| Boolean | enable_dp_rho_ref | Enables/ hides showing dp_ref and rho_ref | |
| Real | k_min | 0.03 | Remaining flow at actuation signal u = 0 |
| Layout | |||
| Boolean | displayInstanceName (from DropOfCommonsPlus) | dropOfCommons.displayInstanceNames | = true, if instance name is displayed |
| Boolean | displayParameters (from DropOfCommonsPlus) | dropOfCommons.displayParameters | = true, if displaying parameters is enabled |
| Advanced | |||
| Boolean | considerInertance (from SISOFlow) | dropOfCommons.considerInertance | =true, if transient momentum (inertance) term is considered; disable only for advanced use |
| Utilities.Units.Inertance | L (from SISOFlow) | dropOfCommons.L | Inertance |
| StateSelect | m_flowStateSelect (from SISOFlow) | StateSelect.default | State selection for mass flow rate |
| Boolean | clip_p_out (from SISOFlow) | = false, if dr_corr=0 (correction of inertial pressure difference) | |
| Medium.AbsolutePressure | p_min (from SISOFlow) | dropOfCommons.p_min | Minimum steady-state output pressure |
| Initialization › Mass flow rate | |||
| InitializationMethods | initM_flow (from SISOFlow) | ThermofluidStream.Utilities.Types.InitializationMethods.none | Initialization method for mass flow rate |
| SI.MassFlowRate | m_flow_0 (from SISOFlow) | 0 | Initial value for mass flow rate |
| Utilities.Units.MassFlowAcceleration | m_acceleration_0 (from SISOFlow) | 0 | Initial value for derivative of mass flow rate |
| Advanced › Reference values | |||
| SI.PressureDifference | dp_ref | 1e5 | Reference pressure difference |
| Medium.Density | rho_ref | 1000 | Reference density |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Inlet | inlet (from SISOFlow) | ||
| Outlet | outlet (from SISOFlow) | ||
| Modelica.Blocks.Interfaces.RealInput | u_in | Valve control input signal [] |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.MassFlowRate | m_flow (from SISOFlow) | inlet.m_flow | Mass flow rate |
| SI.Pressure | dr_corr (from SISOFlow) | Correction of inertial pressure difference | |
| SI.Pressure | dp (from SISOFlow) | Pressure difference | |
| Medium.AbsolutePressure | p_in (from SISOFlow) | Medium.pressure(inlet.state) | Inlet pressure |
| Medium.SpecificEnthalpy | h_in (from SISOFlow) | Medium.specificEnthalpy(inlet.state) | Inlet specific enthalpy |
| Medium.MassFraction[Medium.nXi] | Xi_in (from SISOFlow) | Medium.massFraction(inlet.state) | Inlet mass fractions |
| Medium.AbsolutePressure | p_out (from SISOFlow) | Outlet pressure | |
| Medium.SpecificEnthalpy | h_out (from SISOFlow) | Outlet specific enthalpy | |
| Medium.MassFraction[Medium.nXi] | Xi_out (from SISOFlow) | Outlet mass fractions | |
| Real | u | Actuation input for flow calculation |