modelTanValve
Valve with tan-shaped flow resistance
Extends from Interfaces.SISOFlow (Base Model with basic flow eqautions for SISO).
Information
The TanValve is the most basic valve and can be used when no valve type is set yet.
It adjusts its flow resistance coefficient according to a tangens of the input. The pole of the tan function can lead to numerical problems.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| String | instanceName (from DropOfCommonsPlus) | getInstanceName() | Instance name |
| Boolean | invertInput | false | = true, if input u_in is inverted |
| SI.MassFlowRate | m_flow_ref | 0.1 | Reference mass flow rate |
| Medium.AbsolutePressure | p_ref | 1e5 | Reference pressure |
| Real | relativeLeakiness | 1e-3 | Imperfection of valve |
| Layout | |||
| Boolean | displayInstanceName (from DropOfCommonsPlus) | dropOfCommons.displayInstanceNames | = true, if instance name is displayed |
| Boolean | displayParameters (from DropOfCommonsPlus) | dropOfCommons.displayParameters | = true, if displaying parameters is enabled |
| Advanced | |||
| Boolean | considerInertance (from SISOFlow) | dropOfCommons.considerInertance | =true, if transient momentum (inertance) term is considered; disable only for advanced use |
| Utilities.Units.Inertance | L (from SISOFlow) | dropOfCommons.L | Inertance |
| StateSelect | m_flowStateSelect (from SISOFlow) | StateSelect.default | State selection for mass flow rate |
| Boolean | clip_p_out (from SISOFlow) | = false, if dr_corr=0 (correction of inertial pressure difference) | |
| Medium.AbsolutePressure | p_min (from SISOFlow) | dropOfCommons.p_min | Minimum steady-state output pressure |
| Initialization › Mass flow rate | |||
| InitializationMethods | initM_flow (from SISOFlow) | ThermofluidStream.Utilities.Types.InitializationMethods.none | Initialization method for mass flow rate |
| SI.MassFlowRate | m_flow_0 (from SISOFlow) | 0 | Initial value for mass flow rate |
| Utilities.Units.MassFlowAcceleration | m_acceleration_0 (from SISOFlow) | 0 | Initial value for derivative of mass flow rate |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Inlet | inlet (from SISOFlow) | ||
| Outlet | outlet (from SISOFlow) | ||
| Modelica.Blocks.Interfaces.RealInput | u | Valve control signal [] |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.MassFlowRate | m_flow (from SISOFlow) | inlet.m_flow | Mass flow rate |
| SI.Pressure | dr_corr (from SISOFlow) | Correction of inertial pressure difference | |
| SI.Pressure | dp (from SISOFlow) | Pressure difference | |
| Medium.AbsolutePressure | p_in (from SISOFlow) | Medium.pressure(inlet.state) | Inlet pressure |
| Medium.SpecificEnthalpy | h_in (from SISOFlow) | Medium.specificEnthalpy(inlet.state) | Inlet specific enthalpy |
| Medium.MassFraction[Medium.nXi] | Xi_in (from SISOFlow) | Medium.massFraction(inlet.state) | Inlet mass fractions |
| Medium.AbsolutePressure | p_out (from SISOFlow) | Outlet pressure | |
| Medium.SpecificEnthalpy | h_out (from SISOFlow) | Outlet specific enthalpy | |
| Medium.MassFraction[Medium.nXi] | Xi_out (from SISOFlow) | Outlet mass fractions |