modelPartialPrescribed
Base class
Information
Defines the input signals.
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.MassFlowRate | m_flow | firstOrder.y | Mass flow rate |
| Medium.AbsolutePressure | p_in | inletPressure.y | Inlet pressure |
| Medium.Temperature | T_in | inletTemperature.y | Inlet temperature |
| Real | pRatio | pressureRatio.y | Pressure ratio |
| Medium.AbsolutePressure | p_out | p_in*pRatio | Outlet pressure |
| SI.PressureDifference | dp | p_out - p_in | Pressure difference |
| SI.Efficiency | eta_is | isentropicEfficiency.y | Isentropic efficiency |
| Medium.ThermodynamicState | state_in | Medium.setState_pT(p_in, T_in) | |
| ThermofluidStream.Idealized.Processes.AdiabaticThermodynamicModels.FullMedium | adiabaticModel | Adiabatic process calculation | |
| Medium.SpecificEnthalpy | h_out | adiabaticModel.h_out | Outlet specific enthalpy |
| Medium.SpecificEnthalpy | h_in | Medium.specificEnthalpy(state_in) | Inlet specific enthalpy |
| SI.SpecificEnthalpy | dh | h_out - h_in | Specific enthalpy difference |
| SI.Power | P | m_flow*dh | Power |
| ThermofluidStream.DropOfCommons | dropOfCommons | ||
| Modelica.Blocks.Sources.SawTooth | inletPressure | ||
| Modelica.Blocks.Sources.SawTooth | inletTemperature | ||
| Modelica.Blocks.Sources.SawTooth | pressureRatio | ||
| Modelica.Blocks.Sources.RealExpression | outletPressure | ||
| Modelica.Blocks.Sources.SawTooth | massFlowRate | ||
| Modelica.Blocks.Continuous.FirstOrder | firstOrder | ||
| Modelica.Blocks.Sources.RealExpression | power | ||
| EnergyFlow.Sources.PrescribedEnergyFlow | energyFlowSource | ||
| Modelica.Blocks.Sources.RealExpression | pressureDifference | ||
| Modelica.Blocks.Sources.SawTooth | isentropicEfficiency |
Contents
| Name | Description |
|---|---|
 Medium |
Revisions
-
2026, by Raphael Gebhart (raphael.gebhart@dlr.de):
Initial version.