modelSISOFlowBend
Duplicate of SISOFlow (rotated outlet by 90°)
Extends from ThermofluidStream.Utilities.DropOfCommonsPlus (Extend this to use 'dropOfCommons', 'instanceName', 'displayInstanceName' and 'displayParameters').
Information
Duplicate of SISOFlow (with rotated outlet connector).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| String | instanceName (from DropOfCommonsPlus) | getInstanceName() | Instance name |
| Layout | |||
| Boolean | displayInstanceName (from DropOfCommonsPlus) | dropOfCommons.displayInstanceNames | = true, if instance name is displayed |
| Boolean | displayParameters (from DropOfCommonsPlus) | dropOfCommons.displayParameters | = true, if displaying parameters is enabled |
| Advanced | |||
| ThermofluidStream.Utilities.Units.Inertance | L | dropOfCommons.L | Inertance |
| StateSelect | m_flowStateSelect | StateSelect.default | State selection for mass flow rate |
| Boolean | clip_p_out | = false, if dr_corr=0 (correction of inertial pressure difference) | |
| Medium.AbsolutePressure | p_min | dropOfCommons.p_min | Minimum steady-state output pressure |
| Initialization › Mass flow rate | |||
| InitializationMethods | initM_flow | ThermofluidStream.Utilities.Types.InitializationMethods.none | Initialization method for mass flow rate |
| SI.MassFlowRate | m_flow_0 | 0 | Initial value for mass flow rate |
| ThermofluidStream.Utilities.Units.MassFlowAcceleration | m_acceleration_0 | 0 | Initial value for derivative of mass flow rate |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| ThermofluidStream.Interfaces.Inlet | inlet | ||
| ThermofluidStream.Interfaces.Outlet | outlet |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.MassFlowRate | m_flow | inlet.m_flow | Mass flow rate |
| SI.Pressure | dr_corr | Correction of inertial pressure difference | |
| SI.Pressure | dp | Pressure difference |
Contents
| Name | Description |
|---|---|
 Medium | Medium model |