.ThermofluidStream.Processes.Pipes.SuddenExpansion .ThermofluidStream.Processes.Pipes.SuddenExpansionThis component models a sudden pipe expansion. It computes the pressure loss of the fluid depending on the massflow rate or the massflow rate depending on a given pressure difference, some medium properties and the geometry of the expansion. The component is valid for both incompressible and compressible calculation up to at least Ma 0.3 at pipe outlet and one phase medium.
The pipe bend component is using the partial model SISOFlow_nonConstArea implementing the common flow balances. For the calculation of pressure loss the function dp_suddenChange_DP by Modelica is implemented. The input records dp_suddenChange_IN_con & dp_suddenChange_IN_var are overwritten with the input parameters defining the geometry of the expansion and fluid properties. For more information on the underlying pressure loss function, click here. To improve the accuracy when compressible media are used, center state fluid properties (mean dynamic viscosity & mean density) are defined and refered to in the pressure loss function.
The following figure, a resistance coefficient chart representing the pressure loss model under common conditions is shown. (Currently not yet available)
[P. Jordan; HTWG Konstanz; 10/23]
