modelMultiSensor_Tp

Temperature and pressure sensor

Extends from ThermofluidStream.Utilities.DropOfCommonsPlus (Extend this to use 'dropOfCommons', 'instanceName', 'displayInstanceName' and 'displayParameters').

Information

Sensor for measuring temperature and pressure at once.

This sensor can be connected to a fluid stream without a junction.

Type	Name	Default	Description
String	instanceName (from DropOfCommonsPlus)	getInstanceName()	Instance name
Integer	digits	3	Number of significant digits to be displayed
ThermofluidStream.Sensors.Internal.Types.TemperatureUnit	temperatureUnit	"K"	Temperature unit (display and output)
ThermofluidStream.Sensors.Internal.Types.PressureUnit	pressureUnit	"Pa"	Pressure unit (display and output)
String	temperatureString	if temperatureUnit == "K" then "K" elseif temperatureUnit == "degC" then "°C" else "error"
Layout
Boolean	displayInstanceName (from DropOfCommonsPlus)	dropOfCommons.displayInstanceNames	= true, if instance name is displayed
Boolean	displayParameters (from DropOfCommonsPlus)	dropOfCommons.displayParameters	= true, if displaying parameters is enabled
Output
Boolean	outputTemperature	false	= true, if temperature output is enabled
Boolean	outputPressure	false	= true, if pressure output is enabled
Boolean	filter_output	false	= true, if sensor output is filtered (to break algebraic loops)
SI.Time	TC	0.1	Time constant of sensor output filter (PT1)
InitMode	init	InitMode.steadyState	Initialization mode for sensor output
Real	T_0	0	Start value for temperature output
Real	p_0	0	Start value for pressure output

Type	Name	Default	Description
Interfaces.Inlet	inlet
Modelica.Blocks.Interfaces.RealOutput	T_out	T	Temperature output connector
Modelica.Blocks.Interfaces.RealOutput	p_out	p	Pressure output connector

Type	Name	Default	Description
Real	p
Real	T
Real	direct_p
Real	direct_T

Name	Description
Medium	Medium model