modelJunctionN
Junction with N inlets and one outlet
Extends from ThermofluidStream.Utilities.DropOfCommonsPlus (Extend this to use 'dropOfCommons', 'instanceName', 'displayInstanceName' and 'displayParameters').
Information
Generic junction with an array of N upstream connections and one downstream connection. Use this model for parameterized merge structures.
considerInertance
The model is not suitable for the parameter considerInertance; see
Idealized.UsersGuide.InertanceNeglect
and compare with
Idealized.Topology.
In a future version, the Idealized junction models may be integrated into this model.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| String | instanceName (from DropOfCommonsPlus) | getInstanceName() | Instance name |
| Integer | N | 1 | Number of inlets |
| Boolean | assumeConstantDensity | true | = true, if mixture states are determined by mass flow rates |
| Layout | |||
| Boolean | displayInstanceName (from DropOfCommonsPlus) | dropOfCommons.displayInstanceNames | = true, if instance name is displayed |
| Boolean | displayParameters (from DropOfCommonsPlus) | dropOfCommons.displayParameters | = true, if displaying parameters is enabled |
| Advanced | |||
| SI.MassFlowRate | m_flow_eps | dropOfCommons.m_flow_reg | Regularization threshold for small mass flows |
| Utilities.Units.Inertance | L | dropOfCommons.L | Inertance of each inlet/outlet |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Interfaces.Inlet[N] | inlets | Vector of N inlets | |
| Interfaces.Outlet | outlet | Outlet |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Real[N] | w | Regularized weighting factor for specific enthalpy | |
| Medium.Density[N] | rho | Medium.density(inlets.state) | Density at inlets |
Contents
| Name | Description |
|---|---|
 Medium | Medium model |
 mfkprotected |