modelTerminalRear
Zero mass flow rate fore boundary
Extends from ThermofluidStream.Utilities.DropOfCommonsPlus (Extend this to use 'dropOfCommons', 'instanceName', 'displayInstanceName' and 'displayParameters').
Information
Rear Boundary that terminates the flow. The Boundary has to be connected to the rear end of your model and therefore has a fore port.
It imposes a m_flow=0 boundary and with a time constant, adapts the pressure sucht, that inertal pressure r goes to zero.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| String | instanceName (from DropOfCommonsPlus) | getInstanceName() | Instance name |
| Medium.SpecificEnthalpy | h | Medium.h_default | Specific enthalpy set value |
| Medium.MassFraction | Xi | Medium.X_default[1:Medium.nXi] | Mass fractions set value |
| Medium.AbsolutePressure | p_0 | Medium.p_default | Initial pressure |
| Layout | |||
| Boolean | displayInstanceName (from DropOfCommonsPlus) | dropOfCommons.displayInstanceNames | = true, if instance name is displayed |
| Boolean | displayParameters (from DropOfCommonsPlus) | dropOfCommons.displayParameters | = true, if displaying parameters is enabled |
| Advanced | |||
| SI.Time | TC | 0.1 | Time constant for pressure adaption |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Interfaces.Fore | fore |
Contents
| Name | Description |
|---|---|
 Medium | Medium model |