| String | instanceName (from DropOfCommonsPlus) | getInstanceName() | Instance name |
| SI.Radius | r | | Radius |
| SI.Length | l | | Length |
| Layout |
| Boolean | displayInstanceName (from DropOfCommonsPlus) | dropOfCommons.displayInstanceNames | = true, if instance name is displayed |
| Boolean | displayParameters (from DropOfCommonsPlus) | dropOfCommons.displayParameters | = true, if displaying parameters is enabled |
| Advanced |
| Utilities.Units.Inertance | L (from SISOBiFlow) | dropOfCommons.L | Inertance |
| StateSelect | m_flowStateSelect (from SISOBiFlow) | StateSelect.default | State select for mass flow rate |
| Boolean | clip_p_out (from SISOBiFlow) | | If true, set dr_corr to zero |
| Medium.AbsolutePressure | p_min (from SISOBiFlow) | dropOfCommons.p_min | Minimal steady-state output pressure |
| Medium.Density | rho_min | dropOfCommons.rho_min | Minium inlet density |
| Initialization |
| InitializationMethods | initM_flow (from SISOBiFlow) | ThermofluidStream.Utilities.Types.InitializationMethods.none | Initialization method for mass flow rate |
| SI.MassFlowRate | m_flow_0 (from SISOBiFlow) | 0 | Initial value for mass flow rate |
| Utilities.Units.MassFlowAcceleration | m_acceleration_0 (from SISOBiFlow) | 0 | Initial value for der(m_flow) |
| Advanced › Regularization |
| SI.MassFlowRate | m_flow_reg (from SISOBiFlow) | dropOfCommons.m_flow_reg | Regularization threshold of mass flow rate |
| Advanced › Inertance |
| Boolean | computeL | true | = true, if inertance L is computed from the geometry |
| Utilities.Units.Inertance | L_value | dropOfCommons.L | Inertance |
pLoss