.ThermofluidStream.Undirected.Topology.ConnectForeOutlet

Information

This connector can be used to connect a unidirectional inlet to a undirected rear port.

The state from the rearward direction of the fore port is handed to the outlet, the total pressure as well as the massflow of outlet and port are set equal.

Note that when the flow is reversed, the resulting inertial pressure can be different on both sides of this connector.

Since the unidirectional side of this connector is an oulet, there is no information about the rear state from this side. This information must be given by the StateInlet.

Contents

Name	Description
Medium	Medium model