modelConnectInletRear
Connects inlet to rear port
Extends from ThermofluidStream.Utilities.DropOfCommonsPlus (Extend this to use 'dropOfCommons', 'instanceName', 'displayInstanceName' and 'displayParameters').
Information
This connector can be used to connect a unidirectional outlet to a undirected fore port.
The state from the inlet is given to the backward direction of the rear port, the total pressure as well as the massflow of inlet and port are set equal.
Note that when the flow is reversed, the resulting inertial pressure can be different on both sides of this connector.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| String | instanceName (from DropOfCommonsPlus) | getInstanceName() | Instance name |
| Layout | |||
| Boolean | displayInstanceName (from DropOfCommonsPlus) | dropOfCommons.displayInstanceNames | = true, if instance name is displayed |
| Boolean | displayParameters (from DropOfCommonsPlus) | dropOfCommons.displayParameters | = true, if displaying parameters is enabled |
| Advanced | |||
| Utilities.Units.Inertance | L | dropOfCommons.L | Inertance |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| ThermofluidStream.Interfaces.Inlet | inlet | ||
| Interfaces.Rear | rear |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| ConnectInletFore | connectInletFore | ||
| ConnectRearRear | connectRearRear |
Contents
| Name | Description |
|---|---|
 Medium | Medium model |