modelConnectorInletOutletFore
Connects fore port to directed flow
Extends from ThermofluidStream.Utilities.DropOfCommonsPlus (Extend this to use 'dropOfCommons', 'instanceName', 'displayInstanceName' and 'displayParameters').
Parameters
| Type | Name | Default | Description |
|---|
| String | instanceName (from DropOfCommonsPlus) | getInstanceName() | Instance name |
| Boolean | assumeConstantDensity | true | = true, if mixture states are determined by mass flow rates |
| Layout |
| Boolean | displayInstanceName (from DropOfCommonsPlus) | dropOfCommons.displayInstanceNames | = true, if instance name is displayed |
| Boolean | displayParameters (from DropOfCommonsPlus) | dropOfCommons.displayParameters | = true, if displaying parameters is enabled |
| Advanced |
| Utilities.Units.Inertance | L | dropOfCommons.L | Inertance |
| SI.MassFlowRate | m_flow_ref | dropOfCommons.m_flow_reg | Reference mass flow rate |
| Medium.AbsolutePressure | p_ref | 1e5 | Reference pressure |
| SI.MassFlowRate | m_flow_reg | dropOfCommons.m_flow_reg | Regularization threshold for small mass flow rates |
Contents
| Name | Description |
|---|
 Medium | Medium model |
