.TransiEnt.Basics.Adapters.EPP_to_QS

Information

Adapter for switching from Transient electric power port to quasi stationary pin

1. Purpose of model

Adapter from Transient electric power port (EPP) to quasi stationary pin (QS). Defines active and reactive power on transient electric power port. Therefore it must be connected to Transient components defining frequency and voltage.

2. Level of detail, physical effects considered, and physical insight

Purely technical component without physical modeling.

3. Limits of validity

Purely technical component without physical modeling.

4. Interfaces

epp: Transient electric power port with active and reactive power, frequency and voltage

voltageP: MSL quasistationary pin

5. Nomenclature

(no elements)

6. Governing Equations

(no equations, see diagram view for connections)

7. Remarks for Usage

The transient side must be connected to a model which defines frequency and voltage (e.g. a grid) and the quasistationary side of the adapter must be connected to a model which defines power (e.g. a consumer).

See this tester to learn more about how to use this model.

8. Validation

Tested in check model "TransiEnt.Basics.Adapters.Check.TestEPP_to_QS"

9. References

(no remarks)

10. Version History

Model created by Rebekka Denninger (rebekka.denninger@tuhh.de) on Mon Feb 29 2016

Model revised by Pascal Dubucq (dubucq@tuhh.de) on 20.04.2017