.TransiEnt.Basics.Adapters.Gas.RealH2_to_RealSG4

Information

Adaper for switching from real gas H2 to real gas SG4 fluid models

1. Purpose of model

This model represents an adapter to switch from real gas H2 to real gas SG4 fluid models.

2. Level of detail, physical effects considered, and physical insight

Temperature, pressure and mass flow stay the same. The model only works in the design flow direction.

3. Limits of validity

Only valid for one-phase real gas H2 and real gas SG4 fluid models.

4. Interfaces

WaterPortIn: inlet port for real gas H2

gasPortOut: outlet port for real gas SG4

5. Nomenclature

(no elements)

6. Governing Equations

(no equations)

7. Remarks for Usage

It is important to ensure that the flow is always in the design flow direction.

8. Validation

Tested in check model "TestRealGasAdapters"

9. References

(no remarks)

10. Version History

Model created by Carsten Bode (c.bode@tuhh.de) on Mon Oct 23 2017