modelReal_ph_to_Ideal_pT
Adapter that switches from real to ideal fluid models
Extends from TransiEnt.Basics.Icons.RealToIdealAdapter (Icon for real to ideal adapters).
Information
Adapter for switching from real to ideal gas fluid models
1. Purpose of model
This model represents an adapter to switch from real to ideal gas fluid models.
2. Level of detail, physical effects considered, and physical insight
Temperature, pressure and mass flow stay the same. The model only works in the design flow direction.
3. Limits of validity
Only valid for real and ideal gas fluid models.
4. Interfaces
gasPortIn: inlet port for real gas
gasPortOut: outlet port for ideal gas
5. Nomenclature
(no elements)
6. Governing Equations
(no equations)
7. Remarks for Usage
It is important to ensure that the flow is always in the design flow direction.
8. Validation
Tested in check model "TestRealGasAdapters"
9. References
(no remarks)
10. Version History
Model created by Zizhe Wang (zizhe.wang@tu-dresden.de) on Tue May 16 2023
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| TransiEnt.Basics.Media.Gases.VLE_VDIWA_SG6_var | real | ||
| TransiEnt.Basics.Media.Gases.Gas_VDIWA_SG6_var | ideal |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| TransiEnt.Basics.Interfaces.Gas.RealGasPortIn | gasPortIn | Input for real gas | |
| TransiEnt.Basics.Interfaces.Gas.IdealGasTempPortOut | gasPortOut | Output for ideal gas |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| TransiEnt.SimCenter | simCenter |