modelQS_to_EPP

Information

Adapter for switching from quasi stationary pin to Transient electric power port (EPP)

1. Purpose of model

Adapter from MSL quasis stationary pin (QS) to Transient electric power port (EPP). Defines frequency and voltage on transient electric power port. Therefore it must be connected to Transient components defining power flows.

2. Level of detail, physical effects considered, and physical insight

Purely technical component without physical modeling.

3. Limits of validity

Purely technical component without physical modeling.

4. Interfaces

epp_IN: Transient electric power port with active and reactive power, frequency and voltage

currentP: MSL quasistationary pin

5. Nomenclature

(no elements)

6. Governing Equations

(no equations, see diagram view for connections)

7. Remarks for Usage

The transient side must be connected to a model which defines power flows (e.g. a consumer) and the quasistationary side of the adapter must be connected to a model which defines frequency and voltage (e.g. a generator).

See this tester to learn more about how to use this model.

8. Validation

Tested in check model "TransiEnt.Basics.Adapters.Check.Test_QS_to_EPP_with_PiModel"

9. References

(no remarks)

10. Version History

Model created by Rebekka Denninger (rebekka.denninger@tuhh.de) on Mon Feb 29 2016

Model revised by Pascal Dubucq (dubucq@tuhh.de) on 20.04.2017

Connectors

Components