.TransiEnt.Basics.Interfaces.General.MechanicalPowerIn

Information

1. Purpose of model

Extends the MSL RealInput Connector by defining the quantity, unit and display unit.

2. Level of detail, physical effects considered, and physical insight

(Purely technical component without physical modeling.)

3. Limits of validity

(Purely technical component without physical modeling.)

4. Interfaces

Modelica RealInput: mass flow rate in [kg/s]

5. Nomenclature

(no elements)

6. Governing Equations

(no equations)

7. Remarks for Usage

This connector should only be used for mass flows (type consistency).

8. Validation

(no validation or testing necessary)

9. References

(no remarks)

10. Version History

Model created by Carsten Bode (c.bode@tuhh.de), Nov 2020

Definition

connector MechanicalPowerIn = Modelica.Blocks.Interfaces.RealInput(final quantity = "Power", final unit = "W", displayUnit = "W");