.TransiEnt.Basics.Interfaces.General.PressureDifferenceIn

Information

1. Purpose of model

Extends the MSL RealInput Connector by defining the quantity, unit and display unit.

2. Level of detail, physical effects considered, and physical insight

(Description)

3. Limits of validity

(Description)

4. Interfaces

Modelica RealInput: pressure difference in [Pa]

5. Nomenclature

(no elements)

6. Governing Equations

(no equations)

7. Remarks for Usage

This connector should only be used for pressure differences (type consistency).

8. Validation

(none)

9. References

(none)

10. Version History

Model created by Carsten Bode (c.bode@tuhh.de), Jul 2018

Definition

connector PressureDifferenceIn = Modelica.Blocks.Interfaces.RealInput(final quantity = "PressureDifference", final unit = "Pa", displayUnit = "bar");