connectorFluidPort
Basic fluid port in TransiEnt library consisting of massflow, pressure, enthalpy and composition
Information
1. Purpose of model
This connector is used for fluid flow between components.
2. Level of detail, physical effects considered, and physical insight
(Description)
3. Limits of validity
(Description)
4. Interfaces
(none)
5. Nomenclature
m_flow Mass flow rate in [kg/s]
p Absolute pressure in the connection point in [Pa]
h_outflow Specific thermodynamic enthalpy close to the connection point if m_flow < 0 [J/kg]
xi_outflow Independent mixture mass fractions m_i/m close to the connection point if m_flow < 0 [1]
6. Governing Equations
(no equations)
7. Remarks for Usage
(none)
8. Validation
(no validation or testing necessary)
9. References
(none)
10. Version History
Created by Lisa Andresen (andresen@tuhh.de), Oct 2014
Components
| Type | Name | Default | Description |
|---|---|---|---|
| TILMedia.VLEFluidTypes.BaseVLEFluid | Medium | Medium model | |
| Modelica.Units.SI.MassFlowRate | m_flow | Mass flow rate from the connection point into the component | |
| Modelica.Units.SI.AbsolutePressure | p | Thermodynamic pressure in the connection point | |
| Modelica.Units.SI.SpecificEnthalpy | h_outflow | Specific thermodynamic enthalpy close to the connection point if m_flow < 0 | |
| Modelica.Units.SI.MassFraction[Medium.nc - 1] | xi_outflow | Independent mixture mass fractions m_i/m close to the connection point if m_flow < 0 |