modelBasalt
Extends from TransiEnt.Basics.Media.Base.BaseSolidWithTemperatureVariantHeatCapacity (Base Solid with two additional variables: specific internal Energy and specific Entropy).
Information
1. Purpose of model
This model contains exemplary material data of basalt with temperature variant heat capacity and thermal conductivity. Both properties are approximated as polynomials in temperature.
2. Level of detail, physical effects considered, and physical insight
The properties of natural rock may vary significantly among quaries etc. This media model represent the measured data of the paper cited below.
3. Limits of validity
(Purely technical component without physical modeling.)
4.Interfaces
(no remarks)
5. Nomenclature
(no elements)
6. Governing Equations
(no equations)
7. Remarks for Usage
(no remarks)
8. Validation
(no validation or testing necessary)
9. References
Data is taken from:
T. Nahhas, X. Py, N. Sadiki, Experimental investigation of basalt rocks as storage material for high-temperature concentrated solar power plants, Renewable and Sustainable Energy Reviews 110 (2019) 226–235.
10. Version History
Created by Michael von der Heyde (heyde@tuhh.de), March 2021, for the FES research project
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.SpecificHeatCapacity | cp_nominal (from BaseSolid) | Specific heat capacity at standard reference point | |
| SI.ThermalConductivity | lambda_nominal (from BaseSolid) | Thermal conductivity at standard reference point | |
| SI.Density | d (from BaseSolid) | Density | |
| Real | nu_nominal (from BaseSolid) | Poisson's ratio at standard reference point | |
| ClaRa.Basics.Units.ElasticityModule | E_nominal (from BaseSolid) | Elasticity module of steel at standard reference point | |
| ClaRa.Basics.Units.HeatExpansionRateLinear | beta_nominal (from BaseSolid) | Linear heat expansion coefficient at standard reference point | |
| SI.ShearModulus | G_nominal (from BaseSolid) | Shear modulus at standard reference point |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Temperature | T (from BaseSolid) | Temperature | |
| SI.SpecificHeatCapacity | cp (from BaseSolid) | Heat capacity | |
| SI.ThermalConductivity | lambda (from BaseSolid) | Thermal conductivity | |
| Real | nu (from BaseSolid) | Poisson's ratio | |
| ClaRa.Basics.Units.ElasticityModule | E (from BaseSolid) | Elasticity module of steel | |
| ClaRa.Basics.Units.HeatExpansionRateLinear | beta (from BaseSolid) | Linear heat expansion coefficient | |
| ClaRa.Basics.Units.ShearModulus | G (from BaseSolid) | Shear modulus | |
| ClaRa.Basics.Units.EnergyMassSpecific | specificInternalEnergy (from BaseSolidWithTemperatureVariantHeatCapacity) | ||
| ClaRa.Basics.Units.EntropyMassSpecific | specificEntropy (from BaseSolidWithTemperatureVariantHeatCapacity) |
Contents
| Name | Description |
|---|---|
| thermalConductivity | lambdap = (C1 + C2*T)^-1 |
| specificHeatCapacity | cp = C1 + C2*T + C3*T^-2 |
| integral_cp_dT | cp = C1 + C2*T + C3*T^-2 |
| integral_cpOverT_dT | cp = C1 + C2*T + C3*T^-2 |