modelPartialSpecificElement1Pin
Partial modell for one pin Inductor, Capacitor and Resistor
Information
1. Purpose of model
Partial model of 1pin using TransiEnt complex single phase interface (L2)
2. Level of detail, physical effects considered, and physical insight
(Purely technical component without physical modeling.)
3. Limits of validity
(Purely technical component without physical modeling.)
4. Interfaces
Apparent power port (epp)
5. Nomenclature
(no elements)
6. Governing Equations
(no equations)
7. Remarks for Usage
(no remarks)
8. Validation
(no remarks)
9. References
(no remarks)
10. Version History
Model created by Pattrick Göttsch and revised by Pascal Dubucq (dubucq@tuhh.de) on 01.10.2014
Adjusted from three phase to single phase by Rebekka Denninger (rebekka.denninger@tuhh.de) on 01.03.2016
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Length | l | 1 | length of element |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| TransiEnt.Basics.Interfaces.Electrical.ApparentPowerPort | epp_p |