modelPartialSpecificElement2Pin
Partial modell for two pin Inductor, Capacitor and Resistor
Information
1. Purpose of model
Partial model of 2pin using TransiEnt complex single phase interface (L2)
2. Level of detail, physical effects considered, and physical insight
(Purely technical component without physical modeling.)
3. Limits of validity
(Purely technical component without physical modeling.)
4. Interfaces
Apperent power port epp_p
Apparent power port epp_n
5. Nomenclature
(no elements)
6. Governing Equations
(no equations)
7. Remarks for Usage
(no remarks)
8. Validation
(no remarks)
9. References
(no remarks)
10. Version History
Model created by Pattrick Göttsch and revised by Pascal Dubucq (dubucq@tuhh.de) on 01.10.2014
Adjusted from three phase to single phase by Rebekka Denninger (rebekka.denninger@tuhh.de) on 01.03.2016
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Length | l | 1 | length of element |
| String | PhaseConvention | "3-Phase" | If the model is composed for one or three phase grids |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| TransiEnt.Basics.Interfaces.Electrical.ApparentPowerPort | epp_p | ||
| TransiEnt.Basics.Interfaces.Electrical.ApparentPowerPort | epp_n |