modelReactance
Extends from Base.PartialSpecificElement2Pin (Partial modell for two pin Inductor, Capacitor and Resistor).
Information
1. Purpose of model
Partial model of a reactance using TransiEnt complex single phase interface (L2). Two pin version.
2. Level of detail, physical effects considered, and physical insight
(Purely technical component without physical modeling.)
3. Limits of validity
(Purely technical component without physical modeling.)
4. Interfaces
Apparent power port epp_p
Apparent power port epp_n
5. Nomenclature
(no elements)
6. Governing Equations
(no equations)
7. Remarks for Usage
(no remarks)
8. Validation
(no remarks)
9. References
(no remarks)
10. Version History
Model created by Pattrick Göttsch and revised by Pascal Dubucq (dubucq@tuhh.de) on 01.10.2014
Adjusted from three phase to single phase by Rebekka Denninger (rebekka.denninger@tuhh.de) on 01.03.2016
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Length | l (from PartialSpecificElement2Pin) | 1 | length of element |
| String | PhaseConvention (from PartialSpecificElement2Pin) | "3-Phase" | If the model is composed for one or three phase grids |
| TransiEnt.Basics.Units.SpecificReactance | x | 1 | specific reactance |