modelResistor
Modell for a specific Resistor. Resistance will be calculated from length and specific resistance
Extends from PartialApparentPower2Pin (Partial modell for two pin Inductor, Capacitor and Resistor).
Information
1. Purpose of model
Partial model of a specific resistor using TransiEnt three phase interface (L3). Two pin version.
2. Level of detail, physical effects considered, and physical insight
(Purely technical component without physical modeling.)
3. Limits of validity
(Purely technical component without physical modeling.)
4. Interfaces
Apparent power port epp_p
Apparent power port epp_n
5. Nomenclature
(no elements)
6. Governing Equations
(no equations)
7. Remarks for Usage
(no remarks)
8. Validation
(no remarks)
9. References
(no remarks)
10. Version History
Model created by Pattrick Göttsch and revised by Pascal Dubucq (dubucq@tuhh.de) on 01.10.2014
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Length | l (from PartialApparentPower2Pin) | 1 | length of element |
| TransiEnt.Basics.Units.SpecificResistance | r | 1 | specific Resistance |