modelPump_Base
Base class for pumps
Extends from TransiEnt.Basics.Icons.Pump.
Information
Purpose of model
A base class for pump models. It contains of two fluid ports with two fluid models for each. A pressure difference, a volume flow rate and a hydraulic power are defined.
Interfaces
fluidPortIn: fluid inlet connected to the hydraulic circuit
fluidPortOut: fluid outlet connected to the hydraulic circuit
eye: EyeOut
Version History
This model was documented by Jan Westphal (j.westphal@tuhh.de) August 2025
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Fundamental Definitions | |||
| TILMedia.VLEFluidTypes.BaseVLEFluid | medium | simCenter.fluid1 | Medium in the component |
| Summary and Visualisation | |||
| Boolean | showExpertSummary | simCenter.showExpertSummary | True, if expert summary should be applied |
| Boolean | showData | true | True, if a data port containing p,T,h,s,m_flow shall be shown, else false |
| Boolean | contributeToCycleSummary | simCenter.contributeToCycleSummary | True if component shall contribute to automatic efficiency calculation |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Basics.Interfaces.Thermal.FluidPortIn | fluidPortIn | ||
| Basics.Interfaces.Thermal.FluidPortOut | fluidPortOut | ||
| ClaRa.Basics.Interfaces.EyeOut | eye |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| TransiEnt.SimCenter | simCenter | ||
| TransiEnt.ModelStatistics | modelStatistics |