modelCO2EmissionSensor
Calculates CO2 emissions from complete combustion of medium
Information
1. Purpose of model
This model calculates the CO2 emission of the input gas. Output and input are identical. This model is only to be used to measure the potential CO2 if combustion of gas took place.
2. Level of detail, physical effects considered, and physical insight
(Description)
3. Limits of validity
Ideal combustion is considered.
4. Interfaces
gasPortIn: inlet for real gas
gasPortOut: outlet for real gas
m_flow_cde: mass flow in kg/s
5. Nomenclature
(no elements)
6. Governing Equations
(no equations)
7. Remarks for Usage
(none)
8. Validation
Tested in check model "TransiEnt.Components.Sensors.RealGas.Check.TestRealGasSensors"
9. References
(none)
10. Version History
Model created by Oliver Schülting (oliver.schuelting@tuhh.de), Jun 2018
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Fundamental Definitions | |||
| TILMedia.VLEFluidTypes.BaseVLEFluid | medium | simCenter.gasModel1 | Medium to be used |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| TransiEnt.Basics.Interfaces.Gas.RealGasPortIn | gasPortIn | Inlet port | |
| TransiEnt.Basics.Interfaces.Gas.RealGasPortOut | gasPortOut | Outlet port | |
| TransiEnt.Basics.Interfaces.General.MassFlowRateOut | m_flow_cde | CDE mass flow rate |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| TransiEnt.SimCenter | simCenter | ||
| Modelica.Units.SI.MolarFlowRate | n_flow_comp_fuel |