.TransiEnt.Consumer.Electrical.AverageLoadConsumer

Information

1. Purpose of model

Static load model with representation of active power as constant current and reactive power as constant impedance. This model can be used in the absence of any further information on the load composition [1].

The constant current active power represents a mix of resistive and motor (nearly const. MVA) devices.

2. Level of detail, physical effects considered, and physical insight

(no remarks)

3. Limits of validity

(no remarks)

4. Interfaces

P_el_set: input for active power in [W] (active power input at nominal frequency)

epp: apparent power port

5. Nomenclature

(no remarks)

6. Governing Equations

(no remarks)

7. Remarks for Usage

(no remarks)

8. Validation

Tested in check model "TransiEnt.Consumer.Electrical.Check.CheckAverageLoadConsumer"

9. References

IEEE Task Force on Load Representation for Dynamic Performance: Load representation for dynamic performance analysis (of power systems). In: IEEE Transactions on Power Systems Bd. 8 (1993), Nr. 2, S. 472–482

10. Version History

Model created by Pascal Dubucq (dubucq@tuhh.de) on 21.04.2017

Model modified by Julian Urbansky, Fraunhofer UMSICHT, in August 2021