modelGasDemandVarH2_varGCV_controlMFlow
Extends from TransiEnt.Basics.Icons.Checkmodel (Icon for check models).
Information
1. Purpose of model
Test model for the model GasConsumerPipe_HFlow. It shows how the gas demand of the consumers controls the mass flow output of the source. A jump in the composition results in a jump in the mass flows as well.
Also, the maximum possible feed-in mass flow rate of hydrogen is calculated using a sensor.
2. Level of detail, physical effects considered, and physical insight
(no remarks)
3. Limits of validity
(no remarks)
4. Interfaces
(no remarks)
5. Nomenclature
(no remarks)
6. Governing Equations
(no remarks)
7. Remarks for Usage
(no remarks)
8. Validation
(no remarks)
9. References
(no remarks)
10. Version History
Model created by Pascal Dubucq (dubucq@tuhh.de) on 01.10.2014
Components
| Type | Name | Default | Description |
|---|---|---|---|
| TransiEnt.SimCenter | simCenter | ||
| TransiEnt.Basics.Tables.GasGrid.NaturalGasVolumeFlowSTP | gasDemandHFlow | ||
| TransiEnt.Consumer.Gas.GasConsumerPipe_HFlow | district | ||
| TransiEnt.Components.Boundaries.Gas.BoundaryRealGas_pTxi | source | ||
| TransiEnt.Grid.Gas.Controller.MaxH2MassFlow_phi | maxH2MassFlow | ||
| TransiEnt.Components.Boundaries.Gas.RealGasCompositionByWtFractions_stepVariation | composition_linearVariation |