.TransiEnt.Consumer.Gas.Control.GCVController

Information

1. Purpose of model

Model to control mass flow rate by measured gross calorific value and given enthalpy flow rate input.

2. Level of detail, physical effects considered, and physical insight

If usePIDcontroller, a LimPID controller will be used. The limits are set according to the mode (Producer, Consumer, both).

If not usePIDcontroller, the mass flow rate is calculated.

3. Limits of validity

(no remarks)

4. Interfaces

m_flow_is - Current hydrogen mass flow in kg/s

GCV_is_sink - actual gross calorific value in sink in J/kg

GCV_is_source - actual gross calorific value in source in J/kg

m_flow_desired - desired mass flow in kg/s

H_flow_set - Desired thermal power in W

5. Nomenclature

(no remarks)

6. Governing Equations

(no remarks)

7. Remarks for Usage

(no remarks)

8. Validation

No validation necessary

9. References

(none)

10. Version History

Model created by Lisa Andresen (andresen@tuhh.de) in May 2016

Model modified by Carsten Bode (c.bode@tuhh.de), Nov 2020: added GCV in different flow directions